3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium

I needed to reliably print a few parts for a Voron 2.4 build, which requires ABS. I have an old Prusa I3 clone in the garage which I've occasionally used for this since there are usually no drafts, and I stink up the garage instead of the house. During the hot summer months, when the garage is often pushing 90F, I'm normally able to get away with printing ABS well with an open frame. Come fall and winter, warping becomes an issue. Plus, the family was getting tired of the "Don't open the garage door!" exclamations from me when I was printing ABS.Picked this up to provide a quick enclosure, with hopes it would allow reliable ABS printing (and allow the garage door to be opened while doing so). This has worked SHOCKINGLY well. Since my printer has been in this enclosure, I've been able to print about 10 parts, a few of which are highly prone to warping (small contact space on the bed). All of them have printed successfully and beautifully. Of course, the blast of "ABS stink" when you unzip it to remove the print is fun."Just the facts, ma'am":Pros:- Super easy to assemble, although it's bigger than you think so have some space.- Canvas with the shiny fireproof lining is thick and well sewed. It didn't feel "cheap" at all. There is quality here.- I find the LED to be plenty of illumination, especially since it reflects off the shiny material inside. My print camera finds it to be plenty of light, too.- A good number of round bungs to route cables through, that seem to be in the right place. Two on the back and one on the right-hand side towards the rear.- Has a rather large flap on the left, which I'm not using. Closes with velcro.- I like that measurements were listed clearly, so I could ensure it would fit and get the correct size. Medium worked for my Prusa I3 clone (about the size of an Ender 3, I guess) with room to spare.- I can print ABS consistently, and get strong, clean prints!Cons:- Bungs are a little on the tight side. Had to really push the power cable through and thought I was going to tear the fabric. I did not, which is also a pro I guess, that canvas is pretty tough!- The clear viewing window has a lot of folds in it, so it can be a little difficult to see print details.Overall, I think this is a fantastic value if you're looking for an inexpensive and plug-and-play enclosure for your 3D printer.

We are very impressed with this enclosure. It was extremely easy to setup and fits our Flashforge Adventurer 5M printer very nicely. Unlike a custom fit case, this does add to the footprint of the printer and requires more space than the printer itself, but if you have room it is a great value. The quality of the materials was higher than I expected for the price and I am particularly pleased with the insulative properties of it. There are plenty of access options for cords and such, but I plugged the USB light strip right into our printer and it makes for a convenient and bright workspace. Highly recommended for anyone who is looking for a simple enclosure to keep in warmth and fumes, and keep out dust or pet hair or whatever.

This is a great enclosure. I have 4 of them. The USB powered light that comes with it is fairly strong and can clip in in multiple places. It not only has a side pocket which I have found useful for keeping paperwork for specific printers with those printers, but it also has a ready spot for installing the exhaust systems that can be purchased. It is very sturdy and puts together quickly. I have used other 3D print enclosures this is definitely the nicest one I've purchased.

I am using this on my Anycubic Kobra 3 and it works great. My office can be drafty at times and stuffy at others. The enclosure allows my 3d prints to be better with far better temperature regulation and, as an added bonus, it keeps little hands away from the hot print bed.The window is large and the LED lights are awesome. They go such a good job that I don't need the light on my printhead or camera to remotely monitor my prints.My only dislike is that that even after several months of use, there are still creases in the window and walls that I just cannot get out. Other than that, just buy one of these!

I’m really glad to get a case for my 3D printer, but any smaller and I would have never been able to fit my Ender Max Neo printer. It has plenty of head space for the printer itself, but it just barely has enough space for the bed plate to move. It’s definitely a big snug. I also had some difficultly with attaching the arm for my filament roll as there really isn’t a good spot for it inside this case. I normally like having the arm overhanging on top, but it drags across the ceiling and there is no safe spot to place it on the printer’s side.However, on the plus side it does do a good job with keeping a consistent temperature and it was pretty easy to put together. I also really appreciate the added light and its durability. Again, just be aware if you have a large printer like mine.

Used with a MakerBot Replicator Plus. Big enough to fit most printers, keeps the heat, smell, and noise down. Mostly print with PLA so not too worried about toxic fumes but didn't notice and fumes leaking out. Muffles the noise but still audible. Slot in back used for easy way to route filament and power cords.

It assembled easily and the interior light is a must-have to see the black media, and if you're monitoring prints with a camera. It is much bigger than I imagined - despite the company providing dimensions. I was surprised to see it has a floor panel also (same material as sides). Has multiple sealed cord openings. Expecting the top of my spool to rub the top, I lowered it about 8" on my AnkerMake M5c by designing a spool relocation adapter that I posted for free download at Printables, along with a Camera shelf and wire management clips. This does not appreciably reduce printer or fan noise, but instead it creates a much more consistent environment and shelters the printer from air flow when the air conditioner is running, resulting in more successful printing.